Rust in bathtubs is often the result of water that has passed through zinc pipes that have deteriorated over time. Due to the mineral and iron deposits left behind by hard water, rust can form on surfaces. This accumulation can substantially reduce the time that passes between installing a brand-new bathtub and needing to have it resurfaced.
Another factor to think about is the material. Bathtubs can be made of anything from porcelain and enamel to acrylic. Different types of disinfectants have different impacts on these elements.
While vinegar can eat away at the enamel, it bleaches right off of an acrylic tub. It’s important to clean your tub in a way that’s safe for the material it’s constructed of, so keep that in mind. Before employing cleaning equipment or solutions on the entire bathtub surface, it is a good idea to perform a test on a small, inconspicuous area of the surface.
The essential steps you need to follow to effectively eliminate rust from your lavatory are laid forth in this post. Refinishing the tub is a possibility if the situation becomes intolerable.
Maintain a Close Eye on Your Tub for Rust
It’s important to double-check that the rust stain on your bathtub really is rust before you start looking for the root of the problem and potential fixes. The soap scum and hard water stains could be the cause of your fixtures’ rusty appearance. If the enamel of your tub hasn’t chipped away and the metal underneath hasn’t been exposed, the issue is probably a stain and not rust.
Fortunately, with the right cleaning products, most stains may be removed without any trouble.
Find Out What’s Causing The Rusting In Your Tub
When rust is present instead of a stain, it is not necessary to clean the area but rather to remove the rust. Since bare metal is a common catalyst for rust development, checking to see if any is exposed should be your first step. The underside of the bathtub is prone to rusting.
This section of the tub lacks a normal door, making access more difficult than necessary. In the event that you don’t have an access panel already, you can have one installed by a professional. You might also try cutting a hole in the wall.
The Solution to Your Rusty Bathtub Is Resurfacing
As long as the rust hasn’t spread too far, you can fix the rusty parts of your bathtub on your own. The task of resurfacing, however, should be delegated to professionals. Specialists in rust prevention, diagnosis, You should consider refinishing experts’ services. With their help, you can be confident that your tub will be fixed professionally, extending its useful life.
Final Thoughts
Rusts develop due to a chemical reaction that occurs when iron or iron alloys like steel are exposed to the elements, especially moisture, and oxygen, for a long time. If your bathtub has rust and you don’t take care of it, you could end up spending a lot of money on repairs in the future.
When dealing with rusty bathtubs, your best bet is to hire a professional restoration service, such as Wayne Tub Reglazing. They are experts at rust removal, but they will also do a complete investigation, pinpoint the cause of the problem, and replace any parts that are damaged. If you engage a specialist and the issue persists, they must stand by their guarantee.